Differences

This shows you the differences between two versions of the page.

--- cable_modem [2023/03/28 13:05] – phillip
+++ cable_modem [2024/10/22 13:30] (current) – phillip
@@ Line 7: / Line 7: @@
 At least two providers of cable modems provide a “subscriber side” interface to “useful information” about the cable modem. Accessing the information is possible at IP address 192.168.100.1 for Arris and Netgear cable modems. For [[https://kb.netgear.com/000059644/How-do-I-log-in-to-my-NETGEAR-cable-modem|Netgear cable modems reference this page]]. My Arris Docsis 3.0 cable modem has the feature described in the following paragraphs.
-Below is one of the “status” pages of a [[https://en.wikipedia.org/wiki/DOCSIS|Docsis]] 3.0 Arris/Motorola cable modem (Model SB6183). [[https://en.wikipedia.org/wiki/DOCSIS|Docsis]] 3.0 indicates each downstream channel could provide up to 44 megabits per second. The status page reflects the result of providing 100 megabits per second on the Optimum cable. 100 megabits per second could be provided with just 3 of the 16 downstream channels. Notice the identification of “Channel” as one of the columns in the graphic below. What is a channel? Think of it as a channel on a TV. The cable modem has the ability to communicate over “multiple channels” at the same time. Looking at the status page of a cable modem and seeing how many channels are “looking good”, or not, gives you the capabilty to know if your cable provider or cable modem is “having problems”. What is “looking good”? The ratio/combination of understanding the columns //Corrected// and //Uncorrectables// can lead to “looking good”. Since the cable modem is yet another “computer in disguise”, it is able to determine if the data arriving over any channel is “correct” or not. The combination of a low SNR and/or too many uncorrectable events would imply there is a “problem” with a channel. One or more “weak” channels might not impact the performance of your internet service. Your cable provider can see the same information, so one might expect the cable provider to help you determine the cause of a “channel” not “looking good”. I suspect a couple of “not so good” channels might not be a problem in some cases. Why? Since each downstream channel can carry about 44 megabits per second, the number of channels needed to provide the speed you pay for, may not require all channels to be usable. The graphic below is from a cable modem which displays status information from the IP address “192.168.100.1”.
+Below is one of the “status” pages of a [[https://en.wikipedia.org/wiki/DOCSIS|Docsis]] 3.0 Arris/Motorola cable modem (Model SB6183). [[https://en.wikipedia.org/wiki/DOCSIS|Docsis]] 3.0 indicates each downstream channel could provide up to 44 megabits per second. The status page reflects the result of providing 100 megabits per second on the Optimum cable. 100 megabits per second could be provided with just 3 of the 16 downstream channels. Notice the identification of “Channel” as one of the columns in the graphic below. What is a channel? Think of it as a channel on a TV. The cable modem has the ability to communicate over “multiple channels” at the same time. Looking at the status page of a cable modem and seeing how many channels are “looking good”, or not, gives you the capabilty to know if your cable provider or cable modem is “having problems”. What is “looking good”? The ratio/combination of understanding the columns //Corrected// and //Uncorrectables// can lead to “looking good”. Since the cable modem is yet another “computer in disguise”, it is able to determine if the data arriving over any channel is “correct” or not. The combination of a low SNR and/or too many uncorrectable events would imply there is a “problem” with a channel. One or more “weak” channels might not impact the performance of your internet service. Your cable provider can see the same information, so one might expect the cable provider to help you determine the cause of a “channel” not “looking good”. I suspect a couple of “not so good” channels might not be a problem in some cases. Why? Since each downstream channel can carry about 44 megabits per second, the number of channels needed to provide the speed you pay for, may not require all channels to be usable.
+October 22, 2024..  As to the graphic below and the question.. "What is an acceptable number for the Uncorrectables column".    In a 24 hour period "a channel" can deliver about or up to 273,600,000 messages/packets of up to 1500 bytes per packet.   The math is is based on 38,000,000 bits per second of data per channel and a packet/message size of 1500 bytes (about 12000 bits).   How you get 38,000,000 bits per second with a 6,000,000 hertz band is "magic in my head".   These numbers were part of a chat/help session with Optimum.    It would be "acceptable" to see as many as several thousand uncorrectables per channel in a 24 hour period.   Please note the graphic below indicates uncorrectables are far less than thousands per day.   However, a few thousand uncorretables per day would be a very small percentage of 273,600,000.
+The graphic below is from a cable modem which displays status information from the IP address “192.168.100.1”.  Please note the time stamp of the graphic is February 2023.
 [[http://sctxcompclub.net/lib/exe/fetch.php?media=firefox_w991kwzcbo.png|{{:firefox_w991kwzcbo.png?direct&800x1700}}]]